How to Install and Use the Lascal BuggyBoard Saddle
By Cheeky Rascals UK | Published: 2026-10-29
Category: How-to Guides
Step-by-step guide to fitting and using the Lascal BuggyBoard Saddle on your stroller. Learn correct attachment, common mistakes, and how to keep your toddler comfortable.
Quick answer
Attach the Lascal BuggyBoard Saddle directly onto a Lascal Maxi BuggyBoard only. Slide the saddle’s bracket onto the board’s rail until it clicks, then adjust the seat height so your toddler’s feet rest flat on the board.
Why the saddle works only with the Maxi BuggyBoard
The Lascal BuggyBoard Saddle is designed exclusively for the Lascal Maxi BuggyBoard. The saddle’s bracket clips onto a dedicated rail that is present only on the Maxi model. It will not fit the Mini or other BuggyBoard versions.
If you already own a Maxi BuggyBoard, the saddle adds a comfortable seat without blocking the standing area. Your toddler can still stand when they prefer, and the saddle folds flat when not in use.
When the saddle might not suit your setup
If your stroller has a narrow wheelbase or you frequently fold the pram with the board attached, check that the saddle does not interfere with folding. The saddle adds a few centimetres of height, so test the clearance before a long walk.
Also, the saddle is intended for toddlers who can sit upright unsupported. For younger children who need a full seat, a dedicated buggy seat may be a better option.
Step-by-step installation and use
- Check compatibility: Ensure your stroller has a Lascal Maxi BuggyBoard attached. The saddle works only with this model. Look for the rail on top of the board – the Mini board does not have one. A common mistake is trying to fit the saddle to a Mini board. Always verify the board model first.
- Position the saddle bracket: Hold the saddle with the seat facing forward (toward the stroller). Slide the bracket onto the rail on top of the Maxi BuggyBoard. Push until you hear a click, confirming it is locked. If it does not click, the bracket may be upside down. Rotate the saddle 180° and try again.
- Adjust the seat height: The saddle has two height positions. Choose the lower setting for younger toddlers so their feet rest flat on the board. Use the higher setting for older children who need more leg room. Feet dangling can cause discomfort. Adjust so the child’s knees are bent at roughly 90° with soles flat on the board.
- Secure your toddler: Place your child on the saddle. The saddle has no built-in harness, so keep one hand on your child or use the stroller’s existing straps if your child is still small. Ensure they hold the stroller handle or frame. Never leave a child unattended on the saddle. Always supervise, especially on uneven ground.
- Remove or fold the saddle when not needed: To remove, press the release button on the bracket and slide the saddle off the rail. Alternatively, fold the seat flat against the board – it stays attached but out of the way. Folding the saddle flat is handy for quick transitions between sitting and standing. Make sure it clicks into the folded position to avoid dragging.
Product fact
- Lascal BuggyBoard® Saddle - Grey with Black Fittings: Compatible with the Lascal Maxi BuggyBoard ONLY. No obstruction to board, there is enough space for the child to stand as well. This means your toddler can choose to sit or stand during the same walk, and you do not lose the original standing platform.
Lascal BuggyBoard® Saddle - Grey with Black Fittings
