How to Replace Lascal BuggyBoard Mini Wheel and Arm Support
By Cheeky Rascals UK | Published: 2026-10-28
Category: How-to Guides
Learn how to replace the wheel and arm support on your Lascal BuggyBoard Mini. Follow our step-by-step guide for a quick, safe repair.
Quick Answer
Yes, you can replace the wheel and arm support on your Lascal BuggyBoard Mini yourself. Order the correct genuine replacement parts and follow the simple steps below to keep your stroller board safe and rolling smoothly.
Why Genuine Lascal Parts Matter
When replacing parts on your BuggyBoard Mini, using genuine Lascal components is important. The replacement wheel is made specifically for the Mini model, ensuring proper fit and reliable performance. Similarly, the arm support comes in left or right versions, so you need to order the correct side for your board.
Using non-genuine parts can compromise the stability of the board and your child's safety. Genuine parts are designed to work seamlessly with the existing mechanism, so you avoid alignment issues and premature wear.
When to Replace the Wheel or Arm Support
Inspect your BuggyBoard regularly. If the wheel is worn, cracked, or no longer rolls smoothly, it's time for a replacement. The arm support may need replacing if it's bent, cracked, or if the board no longer attaches securely to your stroller.
A simple visual check before each outing can catch problems early. If you notice any looseness or unusual noise, address it promptly to avoid further damage.
Step-by-Step Replacement Guide
- Gather Tools and Parts: You'll need the new genuine Lascal wheel or arm support, a small screwdriver (if required), and a clean workspace. Ensure you have the correct side (left or right) for the arm support. Check that you have the right part before starting.
- Remove the Old Wheel: Turn the BuggyBoard upside down. Use a screwdriver to remove any screws or clips securing the wheel. Gently pull the wheel off the axle. Common mistake: forcing the wheel off without removing all fasteners can damage the axle. If the wheel doesn't come off easily, re-check for hidden screws.
- Install the New Wheel: Align the new wheel with the axle and push it firmly into place. Reattach any screws or clips and ensure the wheel spins freely. Check that it is secure before turning the board upright. Spin the wheel manually to confirm smooth movement.
- Remove the Old Arm Support: Locate the arm support that attaches the board to the stroller. Depending on the model, you may need to unscrew it from the board or release a locking mechanism. Note the orientation of the old part before removing it. Take a photo of the old part to reference during installation.
- Attach the New Arm Support: Position the new arm support in the same orientation as the old one. Secure it with the screws or clips you removed. Ensure it is tight and does not wobble. Test the connection by gently pulling on the arm support.
- Test on Your Stroller: Attach the BuggyBoard to your stroller and give it a gentle shake. Roll the stroller forward to ensure the wheel rotates smoothly and the board is stable. Avoid over-tightening screws, as this can strip threads. Always test before placing your child on the board.
Parts You May Need
- Lascal BuggyBoard Replacement Wheel - Mini: Genuine Lascal replacement wheel made specifically for the Mini BuggyBoard; supplied as a single wheel. Ensures an exact fit and maintains a safe, stable ride for your child.
Lascal BuggyBoard Replacement Wheel - Mini - Lascal BuggyBoard Replacement Arm Support: Replacement left or right arm support compatible with Lascal Mini and Maxi BuggyBoard. Order the correct side to keep the board securely attached to your stroller.
Lascal BuggyBoard Replacement Arm Support
