Back to Blog
How-to Guides 2026-11-20 Cheeky Rascals UK 0 views

Fred Safety Stove & Hob Guard: Installation & Safety Tips

Fred Safety Stove & Hob Guard: Installation & Safety Tips

Learn how to install the Fred Safety Stove & Hob Guard and keep your kitchen childproof. Covers fit, adhesive setup, and practical safety checks.

What the Fred Safety Stove & Hob Guard Does

The Fred Safety Stove & Hob Guard is a child-proof barrier that fits around your hob, keeping little hands away from hot surfaces, pans, and stove controls while you cook. It works with electric, gas, ceramic, and induction hobs that measure between 57 cm and 90 cm wide. The guard provides both side and front protection, and its surface stays cool to the touch during normal use.

Installation Steps

Before you start, make sure your hob is clean, dry, and at room temperature. The guard uses Fred ExtremeHold adhesive for a durable bond.

  1. Measure your hob: Check that your hob width falls within 57–90 cm. The guard is designed to fit all common hob types within that range.
  2. Clean the mounting surface: Wipe the area where the adhesive will attach with a mild cleaner and dry thoroughly. Any grease or residue can reduce bond strength.
  3. Position the guard: Hold the guard in place to confirm the fit. The side and front panels should sit flush against the hob edge without blocking ventilation or controls.
  4. Apply the adhesive: Peel the backing from the ExtremeHold adhesive strips and press the guard firmly into position. Apply even pressure along the entire contact area.
  5. Allow the bond to set: The adhesive is designed for a durable hold. Avoid putting weight or stress on the guard until the bond has fully cured according to the manufacturer's instructions.

Product Details at a Glance

  • PREORDER: Fred Safety Stove & Hob Guard: Suitable for electric, gas, ceramic, and induction hobs extending from 57–90 cm. Ensures compatibility with most standard hob sizes before you buy.
    PREORDER: Fred Safety Stove & Hob Guard
    PREORDER: Fred Safety Stove & Hob Guard
  • PREORDER: Fred Safety Stove & Hob Guard: Side and front protection which stays cool to touch. Reduces burn risk even when the hob is on, adding a layer of safety while cooking.
  • PREORDER: Fred Safety Stove & Hob Guard: Fred ExtremeHold adhesive is able to withstand a toddler hanging from it. Gives confidence that the guard will stay in place during active use.

Safety Checks After Installation

Once installed, check that the guard does not interfere with hob controls, gas knobs, or ventilation slots. The guard is designed to allow normal cooking access, but it is worth confirming that all burners or zones can be operated comfortably. Regularly inspect the adhesive bond for any signs of lifting, especially after heavy use or cleaning. If the guard becomes loose, remove it, clean the surface, and reapply fresh adhesive strips.

Related Articles

Customer Service
Home
Products
Cart
Profile