Back to Blog
How-to Guides 2026-11-20 Cheeky Rascals UK 0 views

How to Fit a Fred Safety Pressure Gate Extension Kit

How to Fit a Fred Safety Pressure Gate Extension Kit

Learn how to safely fit the Fred Safety Pressure Gate Extension Kit to widen your pressure gate for larger openings. Step-by-step guide with compatibility tips.

Why You Might Need an Extension Kit

Pressure gates are a convenient, no-drill way to block off stairs or doorways, but they only fit a specific width range. If your opening is wider than the gate's standard maximum, you can use the Fred Safety Pressure Gate Extension Kit to bridge the gap. This kit adds 7cm of width per unit, and you can stack up to three extensions on one side of the gate for a total width of up to 124cm.

Before you start, check that your gate is a Fred Safety Pressure Fit Clear-View or Wooden model. The extension kit is designed exclusively for those gates and will not work with other brands or screw-fit gates.

How to Fit the Extension Kit

Fitting the extension kit is a straightforward process that requires no tools. Follow these steps carefully.

  1. 1. Measure your opening: Measure the width of the stairway or doorway where you plan to install the gate. Note the current maximum width of your Fred Safety pressure gate (without extensions). Subtract that from your opening width to see how many extension kits you need. Each kit adds 7cm.
  2. 2. Choose the side(s) for the extension: You can attach extensions to either side of the gate, or both. The maximum is three extensions on one side. Plan the layout so the gate remains centered or fits your specific opening.
  3. 3. Push the extension into the gate: Simply push one extension into either side of the gate. The design allows a snug, secure fit without screws or adhesive. Ensure it is fully seated before proceeding.
  4. 4. Install the gate as usual: With the extension(s) attached, fit the pressure gate into your opening as you normally would. The extension becomes an integral part of the gate, maintaining the pressure-fit mechanism.
  5. 5. Test the fit: After installation, check that the gate is secure and the extension does not wobble. The gate should still open and close smoothly. If you need more width, repeat the process with additional kits.

Extension Kit Specifications

  • Fred Safety Pressure Gate Extension Kit - Pure White: Each Pressure Gate Extension Kit makes the gate 7cm wider. The kit can extend your gate up to 124cm wide, with a maximum of 3 extensions on either side of the gate. Knowing the exact width increase per kit helps you calculate how many kits you need for your specific opening, avoiding over- or under-ordering.
    Fred Safety Pressure Gate Extension Kit - Pure White
    Fred Safety Pressure Gate Extension Kit - Pure White
  • Fred Safety Pressure Gate Extension Kit - Pure White: Designed ONLY for Fred Safety Pressure Fit Clear-View and Wooden gates. This ensures compatibility. Using the kit with another gate brand or type may create a safety hazard.
  • Fred Safety Pressure Gate Extension Kit - Pure White: Made from lick and bite safe materials. If you have a baby or toddler who mouths objects, the materials are safe for incidental contact.

What to Keep in Mind

The extension kit is designed to be discreet and blend into your home. It does not require any permanent modification to your gate or wall. However, the maximum width of 124cm assumes you are using the correct number of extensions. If your opening is wider, you may need a different gate solution.

Always verify that your gate is a Fred Safety Pressure Fit Clear-View or Wooden model before purchasing. The supplied information does not confirm compatibility with other gate types, so it is best to check your gate's model number if you are unsure.

Related Articles

Customer Service
Home
Products
Cart
Profile