Why a Safety Check Matters
A pressure-fit stairgate relies on tension between walls rather than screws. Over time, shifts in the house or repeated use can loosen that tension. A quick check each week helps you catch issues before they become a problem.
The Fred Safety Pressure Fit Clear-View Stairgate includes several built-in safety features that make this check straightforward. Knowing what to look for keeps the gate secure and your child safe.
Key Safety Features at a Glance
- Fred Safety Pressure Fit Clear-View Stairgate: Reassuringly child proof with a 2-way child-proof magnetic locking system, 77cm height, and visual colour alert when the gate is left unlocked. The magnetic lock prevents a child from opening the gate, and the colour alert reminds you to lock it after passing through. Both are part of your daily safety check.

Fred Safety Pressure Fit Clear-View Stairgate - Fred Safety Pressure Fit Clear-View Stairgate: Innovatively designed, this gate can easily be operated with only one hand thanks to the built-in pressure lift. One‑handed operation is convenient, but the pressure mechanism must remain tight. If opening or closing feels too easy, the tension may need adjustment.
How to Perform a Safety Check
These steps help you confirm the gate is still securely fitted. Perform them weekly or after any impact to the gate.
- Check the colour alert: Look at the locking indicator. If it shows a colour (the visual alert), the gate is unlocked. Lock it and confirm the colour disappears. This verifies the lock engages properly.
- Test the magnetic lock: With the gate locked, try to open it without using the magnetic release. It should not budge. If it does, the lock or fit may need attention.
- Inspect the pressure fit: Gently push the gate at its centre and near the wall mounts. It should feel solid with no movement. If you see gaps or hear creaking, the pressure pads may need tightening.
- Verify the extension setup: If your gate uses extensions (the gate fits up to 124 cm with 4 extensions), check that each extension is fully seated and the joints are flush. Loose extensions reduce overall stability.
What to Do If the Gate Feels Loose
A pressure-fit gate that shifts or rattles is not secure. First, check that the wall surfaces are clean and flat. Then, adjust the pressure pads according to the manufacturer's instructions. If the gate still does not hold, the opening may be outside the 76–96 cm range (or 124 cm with extensions) or the wall material may not be suitable for pressure mounting. In that case, consider a screw‑fit gate for a permanent fix.
Never use a gate that feels unstable. A correctly installed pressure-fit gate should not move when pushed.


