Back to Blog
Tips & Care 2026-11-18 Cheeky Rascals UK 0 views

BuggyBoard Cotter Pin: What It Does and When to Swap It

BuggyBoard Cotter Pin: What It Does and When to Swap It

A practical FAQ on the Lascal BuggyBoard cotter pin: what it secures, how to spot wear, how to fit a spare, and why it needs checking before every ride.

What the cotter pin actually does

What does the Lascal BuggyBoard cotter pin hold together?
It is the plastic threaded pin that fits through the Lascal BuggyBoard Connector and attaches your board to the pram. It sits in one of the three holes in the Left and Right Arm, depending on your pram, so it is the small part that keeps the connector and arm joined.
Is this the same as a wheel pin?
The supplied record describes this part as a connector pin, not a wheel axle pin. If you are searching for a buggyboard wheel pin replacement, check the part number and the fitting point on your board before ordering, because this cotter pin is specified for the connector and arm, not the wheel assembly.
Which BuggyBoards is it compatible with?
The Lascal spare cotter pin is listed as compatible with both the Lascal Mini and Maxi BuggyBoard. It is supplied in grey and carries part number 81520.

The spare part in brief

  • Lascal BuggyBoard® Spare - Cotter Pin Grey: A plastic threaded pin approximately 2 inches long, part number 81520, compatible with Lascal Mini and Maxi BuggyBoard. Confirms the size, material and board compatibility so you can check it matches the pin you are replacing.
    Lascal BuggyBoard® Spare - Cotter Pin Grey
    Lascal BuggyBoard® Spare - Cotter Pin Grey
  • Lascal BuggyBoard® Spare - Cotter Pin Grey: Fits through the Lascal BuggyBoard Connector and attaches to one of the three holes in the Left and Right Arm, depending on pram. Explains the exact fitting point and why the hole position can differ from pram to pram.

Spotting wear and deciding to swap

How do I know the cotter pin needs replacing?
The supplied information notes that the movement of the board can often lead to the pin loosening, which is why it needs tightening before every use. Inspect the pin each time you tighten it: if the plastic thread or the slot on the head looks damaged, or the pin no longer holds securely, replace it rather than continuing to ride.
Why does it loosen so often?
The board's movement works the threaded pin loose over time. That is a normal characteristic of the fitting, not necessarily a sign the pin is faulty, but it is the reason the manufacturer's tip is to tighten it before every use.
Can I overtighten it?
Yes. The supplied safety guidance says to ensure the pin is securely in place but to be careful not to over tighten it, as this may damage the plastic slot on the head of the pin. That damage can cause problems if you ever need to remove the pin later.

Fitting a replacement cotter pin

The supplied record does not include a full step-by-step fitting procedure, so use the Lascal BuggyBoard user manual for your specific board and follow it alongside these fitting points.

  1. Match the hole to your pram: The pin attaches to one of the three holes in the Left and Right Arm, depending on pram. Use the same hole position as the pin you are replacing unless the manual directs otherwise.
  2. Thread it through the connector: The pin fits through the Lascal BuggyBoard Connector to attach the board to the pram.
  3. Tighten, but do not force it: Make sure the pin is securely in place without over tightening, which can damage the plastic slot on the head.
  4. Check before every use: The manufacturer's tip is that the cotter pin will need to be tightened before every use because board movement can loosen it.

Where this spare fits into BuggyBoard maintenance

The cotter pin is one of several small Lascal BuggyBoard spare parts that wear or work loose with regular use. Keeping a spare means a loose or damaged pin does not sideline the board, and because it is a low-cost part, it is a sensible item to have in your maintenance kit alongside other small fittings.

This article covers the cotter pin only. The supplied record does not confirm fitting instructions for other BuggyBoard components, so check the manual for any part you are replacing.

Related Articles

Customer Service
Home
Products
Cart
Profile